供应小金井气缸轴接头,KOGANEI气缸轴接头

供应小金井气缸轴接头,KOGANEI气缸轴接头
􀋔 The threaded depth in the
cylinder rod socket should be within the
value shown in the catalog. As a
 guide, it should be in a position
about 1 or 2 rotations back from
where it reaches the bottom.
Consult us for any use other
than for the air cylinder.
􀋔 The cylinder joint stud can rotate,

供应小金井气缸轴接头,KOGANEI气缸轴接头
but primarily the cylinder joint is
not designed as a rotary joint,
so it should not be used as a rotaryjoint.
􀋔 It cannot be used again after disassembled.
􀋔 The lubricant has been filled in the body.
􀋔Aligning the axial center and correcting
the parallelism can beperformed easily.
􀋔High machining accuracy for
aligning the axial center is notrequired.
􀋔Time taken for installation can be greatly reduced.