施迈赛拉绳开关特征,概述Schmersal拉绳开关 防止事故的扩大而带来重大损失。 由于安装方便,开关转换可靠,在带式运输现场得到广泛的应用。 热测试电流 Ithe 1 A 额定工作电流/电压 Ie/Ue 24 VDC / 1 A; 36 VDC / 0,8 A 必需有额定短路电流保护 1000 A 保险容量 6 A D型玻璃保险 Must have rated short circuit current protection 1000 A Maximum insurance capacity 6 A D type glass insurance Mechanical life 1.000.000 operation times Operation force () 40.4 ± 3.6 N Impact 30 g 额定绝缘电压 Ui 40 V 拉绳开关是带式输送机必备的安全保护装置, 拉绳开关应安装在输送机两边具有检修通道的地方, 安装位置应确保检修人员在紧急情况下操作方便。 The installation location should ensure that the service personnel are operating in an emergency. The distance between the two switches on the side of about 50m, Using a diameter of Φ4 wire rope connection, elastic should be appropriate. To reduce the impact of wire rope on the start of the switch, Install a care ring every 3m in the rack to support the wire rope. 一侧的两台开关之间距离为50m左右, 采用直径为Φ4的钢丝绳连接,松紧应适度。 为减小钢丝绳自重对开关启动的影响, 每隔3m在机架上装一个托环,以支撑钢丝绳。 Anti-vibration 10 - 150 Hz (0,5 mm / 5 g) Drive the microswitch to cut off the control circuit, causing the conveyor to stop running. Rated impulse withstand voltage Uimp 2.5 kV
施迈赛拉绳开关特征,概述Schmersal拉绳开关
Copyright@2003-2018 上海乾拓贸易有限公司版权所有 电话:021-39529830/39-8005 021-39529831/29-8002 传真:021-39529839
地址:上海嘉定嘉涌路99弄6号713 邮编:201812 易展提供技术支持 沪ICP备09006758号-20 网站管理入口
沪公网安备 31011402005010号