销售德国宝德两位三通转动衔铁电磁阀，BURKERT电磁阀种类

销售德国宝德两位三通转动衔铁电磁阀，BURKERT电磁阀种类
上海乾拓贸易有限公司
企业QQ：
电话；021-69001039
手机；17321017802（微信）
邮箱；17321017802@163.com
地址：上海市嘉定区江桥嘉涌路99弄6号713室
(60% intermittent operation) in 10 min bei 8 Wversion 100% ED for 5 W-version or high-capacity electronic Duty cycle
for PVC with PVC 10% ED (10 min) 100% ED for version with high-capacity electronic continued
• Direct-acting, media-separated valve with diameter   of up to DN 8
• Maintenance-free pivoted armature technology
开关状态可以通过位置反馈以二进制或NAMUR信号显示。
与 DIN EN 17301-803 A 型电缆插头配套，
该阀的安全防护等级为 IP65/67，不锈钢或塑料阀体式 NEMA 4X。
直动式介质隔离电磁阀，通径 DN 8
免维护转动衔铁技术
防震线圈
适用于腐蚀性碱液和酸液
手动开关结构坚固、使用方便
Technical data Orifi ce DN2.0 to 8.0 Available housing materials PTFE PVC (resistant acc.
to DIN 8062, 8061) PP (Polypropylen) PVDF Stainless steel 1.4401 Seal materials FKM / FFKM / EPDM Medium for FKM
Oxydizing acids and substances, hot oils with additives, salt solutions, waste gases Aggressive fl uids, hot air,
 hot oils, Aromate, ether, Esther, ketones (please note Bürkert chemical resistance chart).
 Alkalis, acids up to medium concentration, alkaline washing- and bleaching lyes All Materials For more detailed information
please consult the resistance chart Medium temperature for body material PVDF oder PP EPDM: -30 to +70 °C FKM: -10 to +70 °C
• Service-friendly, durable manual override
• Explosion proof version
• Vibration-proof, block screwed coil system
两位三通式可用作分配阀或混合阀
。根据不同的应用，可以选择各种膜片材质和工作方式。
阀体材质为不锈钢（316L)、PTFE、和 PVC。
24 V DC; (Further voltages on request) Voltage tolerance +/- 10% Cycling rate max. 100/min with AC max.
10/min for UC (high-capacity electronic) Duty cycle for VA 100% Duty cycle bei PVDF, PP and PTFE 40% ED
The 0121 valve is a direct-acting, media-separated pivoted armature valve. It is available in 3/2- and 2/2-way versions.
As a 3/2-way version, it can be used as a distributor or mixing valve.
Various diaphragm material combinations and methods of operation are available depending on the application.
The housing offering includes stainless steel (316L), PTFE, and PVC versions.
 The solenoid coils are moulded with a chemically resistant epoxy.
 The 0121 is equipped with manual override for commissioning and testing.
For reduced energy requirements, all coils can be delivered with electronic power reduction or as an impulse version.
 The switching status can be indicated with position feedback as a binary or NAMUR signal.
In combination with a plug in accordance with DIN EN 17301-803 Form A,
the valves satisfy protection class IP65/67 – in combination with a stainless steel or plastic housing NEMA 4X.
电磁线圈采用耐化学腐蚀的环氧树脂封装。
0121 型配备了手动开关，可用于调试和测试。
如有节能要求，所有线圈都可提供节电式，或脉冲式。
直动式、介质隔离的转动衔铁电磁阀。
两位两通和两位三通式。
FFKM: -10 to +70 °C Medium temperature for body material PTFE or VA EPDM: -30 to +90 °C FKM: -10 to +90 °C FFKM: -10 to +90 °C
Medium temperature for body material PVC EPDM: -30 to +50 °C FKM: -10 to +50 °C FFKM: -10 to +50 °C Ambient temperature Max. +50 °C
Viscosity Max. 37 mm2/s Voltages 24 V 50 Hz; 110 V 50 Hz; 230 V 50 Hz; 120 V 60 Hz; 240 V 60 Hz; 12 V DC;

销售德国宝德两位三通转动衔铁电磁阀，BURKERT电磁阀种类